String Wound Filter Cartridge for Deep Graded Liquid Filtration

String wound filter cartridge are made of yarns tightly intertwined on multihole core by certain technology to form a honeycomb structure with loose outside part and close inner part. As a result, it delivers great depth filtration effects.
Features
- Depth graded filtration.
- Loose outside part and close inner part of the filter cartridge comes out depth structure for graded filtration to effectively retain more particles and enhance its dirt holding capacity and lifespan.
- Wide chemical compatibility.
- Various micron ratings are available.
- Effectively remove both large and small particles from liquids.
Category

Absorbent cotton string wound filter cartridges

PP string wound filter cartridgess

Glass fiber string wound filter cartridges

Power plant string wound filter cartridge
Specification
Product Size | Removal Rating (μm) | 1, 5, 10, 20, 25, 50, 75, 100, 150 | |
---|---|---|---|
Length (L) | inch | 5", 10", 20", 30", 40", 50", 60", 70" | |
mm | 127, 254, 508, 762, 1016, 1270, 1524, 1778 | ||
Diameter (Φ) | OD (mm) | 60, 62, 68, 114 | |
ID (mm) | 28, 30 | ||
Material of Construction | Media | Absorbent cotton | |
End cap | PP | ||
Seal/Gasket | Silicone, EPDM, NBR, VITON | ||
Core | PP, stainless steel | ||
Performance | Max. operating temperature (°C) | 65–120 | |
Max. Operating differential pressure | 2.0 Bar@25 °C |
Product Size | Removal Rating (μm) | 1, 5, 10, 20, 25, 50, 75, 100, 150 | |
---|---|---|---|
Length (L) | inch | 5", 10", 20", 30", 40", 50", 60", 70" | |
mm | 127, 254, 508, 762, 1016, 1270, 1524, 1778 | ||
Diameter (Φ) | OD (mm) | 60, 62, 68, 114 | |
ID (mm) | 28, 30 | ||
Material of Construction | Media | PP | |
End cap | PP | ||
Seal/Gasket | Silicone, EPDM, NBR, VITON | ||
Core | PP, stainless steel | ||
Performance | Max. operating temperature (°C) | 60 | |
Max. Operating differential pressure | 2.0 Bar@25 °C |
Product Size | Removal Rating (μm) | 1, 5, 10, 20, 25, 50, 75, 100, 150 | |
---|---|---|---|
Length (L) | inch | 5", 10", 20", 30", 40", 50", 60", 70" | |
mm | 127, 254, 508, 762, 1016, 1270, 1524, 1778 | ||
Diameter (Φ) | OD (mm) | 60, 62, 68, 114 | |
ID (mm) | 28, 30 | ||
Material of Construction | Media | Glass fiber | |
End cap | PP | ||
Seal/Gasket | Silicone, EPDM, NBR, VITON | ||
Core | PP, stainless steel | ||
Performance | Max. operating temperature (°C) | 200 | |
Max. Operating differential pressure | 2.0 Bar@25 °C |
Product Size | Removal Rating (μm) | 0.1, 0.22, 0.42, 1, 3, 5, 10, 20, 50 | |
---|---|---|---|
Length (L) | inch | 60", 70" | |
mm | 1524, 1778 | ||
Diameter (Φ) | OD (mm) | 60, 65, 68 | |
ID (mm) | 28, 30 | ||
Material of Construction | Media | PP | |
End cap | PP | ||
Drain layer | Non-woven fabric | ||
Seal/Gasket | Silicone, EPDM, NBR, VITON | ||
Core | PP, stainless steel | ||
Performance | Max. operating temperature (°C) | 80 | |
Max. Operating differential pressure | 4.0 Bar@21 °C, 2.4 Bar@80 °C |