Orifice Plate Flow Meter Equipped with A Shunt Device
Orifice plate flow meter is a shunt flow meter made of stainless steel. When the fluid flow through the main orifice plate, the pressure is generated on both sides of the orifice plate. Meanwhile, the fluid flows through the shunt device, the flow rate of the float flow meter is equivalent to that of the main pipeline. As a result, the flow data of the main pipeline can be read by observing the float position and flow scale of the flat flow meter. Orifice plate flow meters are widely used in natural gas plants, water treatment plants, petrochemical plants and refineries, etc.
Features
- Compared with other flow meters, orifice plate flow meter is very cost-effective.
- It requires a small space for installation. Therefore, it is suitable for applications with limited space.
- Aesthetic design, simple structure
- A wide range of connections are available.
- It can be installed both horizontally and vertically.
Category
Thread type orifice plate flow meter
Flange type orifice plate flow meter
Folder type orifice plate flow meter
Separate type orifice plate flow meter
Specification
| Diameter DN (mm) | Range | ||
|---|---|---|---|
| Water (m3/h) | Air (Nm3/h) | ||
| 10 | 3/8" | 0.1–0.5 | 0.8–4 |
| 15 | 1/2" | 0.2–1 | 2–10 |
| 20 | 3/4" | 0.5–2.5 | 5–25 |
| 25 | 1" | 1–5 | 8–40 |
| 32 | 1-1/4" | 1.4–7 | 12–60 |
| 40 | 1-1/2" | 2–10 | 18–90 |
| 50 | 2" | 4–20 | 35–175 |
| 65 | 2-1/2" | 7–35 | 60–300 |
| 80 | 3" | 10–50 | 80–400 |
| 100 | 4" | 18–90 | 160–800 |
| 125 | 5" | 25–125 | 250–1250 |
| 150 | 6" | 40–200 | 350–1700 |
| 200 | 8" | 70–350 | 600–2800 |
| 250 | 10" | 100–500 | 900–5000 |
| 300 | 12" | 180–900 | 1600–7800 |
| 350 | 14" | 200–1000 | 2000–9500 |
| 400 | 16" | 300–1500 | 3000–14500 |
| 450 | 18" | 400–2000 | 4000–19000 |
| 500 | 20" | 500–2500 | 5000–24000 |
Notes:
|
|||
